TTM12K4

Up to 3000 W per channel

PRODUCT CODE
O1-GTO0234

Overview

01
Power Factor Correction PFC for low power consumption and compatibility with a wide range of voltages​
02
Top-grade DSP with high dynamic range and extensive feature set, complete of a user interface integrated with ArmoníaPlus
03
4 input channels with physical analog, digital AES3 connectors and Dante™ connection provide maximum flexibility
04
Input and output IIR, FIR, IIR+FIR equalizers and raised-cosine filters; complete sets of limiters: peak, RMS voltage, RMS current, and TruePower™
05
Improved reliability thanks to the customizable input backup policy that allows to automatically switch input source in case of signal failure
06
Full protection circuitry: over/under AC voltage; troublesome signals (clipping, VHF, long-term RMS); DC; thermal; short circuit; mute at power on/off

Description

TTM series is a multipurpose amplifier platform which includes comprehensive signal processing, 2048 taps FIR filters, Damping Factor Control, Dynamic EQ, analog, AES3, Dante/AES67 inputs and outputs, and a bright 4.3” IPS display with capacitive touch.
The patented PFC-equipped power supply can operate anywhere in the world, and sports 750J of energy storage to provide a consistent performance.
The 4 channels, 2U TTM offers ample power and voltage, allowing for high SPL even with 8 or 16 Ω loads, and is capable of delivering up to 3000 W per channel.
The amplifier can be controlled remotely with ArmoníaPlus and locally through the display interface.
Available functions include preset recall, gain, delay, and muting satisfying all most common end user’s requirements.

Performance

Number of channels 4
Output power
(per channel)
Single channel mode: 2000 W @ 2 Ω, 2700 W @ 4 Ω, 1800 W @ 8 Ω
Bridge mode: 4000 W @ 4 Ω, 5400 W @ 8 Ω
Max output voltage 180 V peak
Max output current > 55 A peak
Power consumption @ 100 V – Standby: 16 W | 1/8 Power @ 4 Ω: 1570 W
@ 240 V – Standby: 17 W | 1/8 Power @ 4 Ω: 1940 W
Current Draw (1/8 Power @ 4 Ω) @ 100 V – 16.5 A
@ 240 V – 8.9 A
Thermal dissipation (1/8 Power @ 4 Ω) @100 V – 1670 BTU/h
@240 V – 2000 BTU/h
AC Main Power Universal regulated switch mode with PFC, SRM
Operating voltage 90 V – 264 VAC @ 50-60 Hz
Frequency response @ 8 Ω 20 Hz – 20 kHz (±1 dB)
Crosstalk (1kHz) -75 dB typ.
THD+N (from 0.1 W to Half Power) < 0.1% (typical < 0.05%)
SMPTE IMD (from 0.1 W to Half Power) < 0.1% (typical < 0.05%)
Input impedance 20 kΩ balanced
AD Converters 24 Bit Tandem™ @ 48 kHz
125 dB-A Dynamic Range – 0.005 % THD+N
DA Converters 24 Bit Tandem™ @ 48 kHz
117 dB-A Dynamic Range – 0.003 % THD+N
Sample rate converter 24 Bit @ 96 kHz
140 dB Dynamic Range – 0.0001 % THD+N
Internal precision 32 bit floating point
Latency 2.5 ms fixed latency architecture
Memory/Presets 50 amplifier snapshots, virtually unlimited speaker presets
Equalizer Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossover linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Delay 2 s (input) + 100 ms (output) for time alignment
Limiters TruePower™, RMS voltage, RMS current, Peak limiter
Damping control Active DampingControl™ and LiveImpedance measurement™
Display dimensions 480 x 272, 4.3″
Display brightness 600 nit
Display control Multitouch capacitive. Rotary encoder 20 steps/turn with pushbutton

Physical

 

Input connectors 4 x XLR-F – Analog signal input (4 x XLR-M, Link)
2 x XLR-F – AES3 signal input (2 x XLR-M, Link)
2 x XLR EtherCon (4 x Dante/AES3 Channels)
Network connectors 2 x RJ45 port
Output connectors 4 x speakON NL4
Height 88,9 mm – 3 1/2″
Width 483 mm – 19″
Depth 381 mm – 15″
Weight 11.3 kg – 24.9 lb

Download

TTM 12K4 Brochure

EN
Dec 2022
0300

TTM Series User Manual

EN
Dec 2023
0201

App Note – Speaker library update

EN
May 2024
0100

TTM & ISA Preset Guide

EN
May 2024
0400

ISAAC subscription

Fill in the following fields. You will immediately receive an email with the link to download ISAAC.