DVS 10P 

Two-way passive loudspeaker



DVS series high efficiency wide-range loudspeaker enclosure: 2-way system with passive crossover
Reflex-loaded 10″ woofer and compression driver with titanium diaphragm
Horn with controlled directivity and wide dispersion (100° x 100° from 500 to 10 kHz).
Trapezoidal cabinet with flying hardware on all panels to meet a wide range of mounting and flying requirements for fixed applications
Receptacle for fitting support stand
High SPL (131.5 dB peak SPL @ 1 m) from ultra-compact dimensions.


DVS 10 is a compact 2-way wide-range loudspeaker system with passive low-loss crossover with built-in overload protection. It comprises a 25 cm high power handling woofer for low and mid frequencies, and a 1″ compression driver for high frequencies, ferrofluid cooled and loaded  with a controlled directivity horn enabling the enclosure to be used in either a vertical or a horizontal position.

It can be used along with a DVS 115/118 SW reflex subwoofer system, when the sound to be reinforced features considerable low frequency content, as is normally the case with live music and dance club applications. The DVS 10 system has phase inversion low frequency loading and a tuned enclosure.
The system’s uniform directivity from 500 Hz to 4 kHz has an average dispersion of 100° horizontal and 117° vertical and average wide-range sound coverage from 500 Hz to 10 kHz is 100° horizontal and 100° vertical.

The acoustic reproduced bandwidth is 48 Hz to 18 kHz at -10 dB. The frequency response of the complete system is +/-3 dB from 55 Hz to 17 kHz. Flown in free-field it has high average wide-range sensitivity, producing 93 dB SPL 1 W / 1 m, (131.5 dB SPL peak). The maximum allowed power is 350 Watt AES (1.400 peak).

The enclosure cabinet has a trapezoidal shape and is built by high quality 15 mm baltic phenolic glued plywood further strengthened by bracing glued inside, which also eliminates any resonance of the sides while the outer finish is in scratch-resistant, waterproof black paint.
The cabinet has two M8 threaded mounting points to facilitate both vertical and horizontal flying by means of the appropriate optional accessories, and other two points to which an adaptor can be fitted for use with an (optional) tripod stand. The snap-mounting protective front grille is made from painted steel mesh.

DVS 10P has been discontinued. Equivalent products are Vegas 8 CX (non powered) and DVS 10P SP (self-powered)


Frequency Response (-10 dB) 48 Hz – 18 kHz
Nominal Dispersion 80° x 60° (H x V)
Impedance (Nom/Min) 8 Ω / 5 Ω
Watt AES (Continuous/Peak) 350 W / 1400 W
Maximum SPL Output * 131.5 dB SPL


Component Low 10″ woofer, vented high-pass box
Component High 1.75″ diaphragm compression driver, horn loaded
Connectors 2 x NL4 in parallen pins 1+/1-
Cabinet Material Baltic birch plywood
Cabinet Finish Black polyurea coating
Grill Epoxy powder coated
Installation Points 14 x M8 threaded points
Pole Mount 35 mm socket
Height 500 mm – 19 5/8″
Width 300 mm – 11 3/4″
Depth 335 mm – 13 1/8″
Weight 13.5 kg – 29.8 lb


No results found.

ISAAC subscription

Fill in the following fields. You will immediately receive an email with the link to download ISAAC.