Conceived and manufactured to provide clients an initial approach to the world of Outline products, the EIDOS series is the result of the desire to offer an even wider public the quality and distinctive lines that have made the Brescia brand a reference point in the sound reinforcement world at international level.
The ideal field of application of the units is in the wide variety of so-called permanent installations (clubs, lounge bars, pubs, music-cafés, theatres, conference rooms, stores, shopping centres and malls, …).
EIDOS 10, EIDOS 12 and EIDOS 15 are two-way full-range units equipped respectively with a 10″, 12″ and 15″ loudspeakers and fitted with passive crossovers manufactured with top grade components (coils with very low resistance and metallized polypropylene capacitors). With these tuned enclosures, the low frequency loading is of the phase inversion type.
The (1.75″ diaphragm) compression driver and waveguide are the same on all three. The latter (90° x 60°) offers a great advantage for installation in small rooms or those with low headroom, as it can be rotated through 90° to ensure the required dispersion no matter what position the cabinet is installed in (horizontal or vertical). The mouth’s ample dimensions ensure remarkable directivity control. The lines of the cabinets enable them to be also used as stage monitors.
The quality of the transducers gives excellent sonic performance when compared with the price bracket, in terms of overall timbre quality and as far as the ability to handle high power is concerned. The cutting edge technology adopted by Outline in the moulding sector has enabled the company to manufacture horns that are rigid and lighter, with obvious benefits in terms of distortion and lower weight.
Fully respecting the high quality standards to which Outline users are accustomed, the cabinets of the EIDOS series are built in 15 mm (phenolic-glued) birch plywood and include bracing to dampen internal resonance.
The outer finish is in scratch-resistant, waterproof black paint and the front of the cabinet is protected by an anti-resonant steel grille covered with sound transparent foam. There is no lack of M8 thread flying points, enabling the enclosures to be easily fitted with flying hardware.
Eidos 15 has been discontinued, the equivalent product is Vegas 15.
Tripod pole for DVS 8P SP, 10P SP, 12P iSP, 15P iSP – EIDOS 10, 12, 15 – VEGAS 10, 12, 15, 8CX, 12CX, 15CX
Telescopic pole for DVS 8P/SP, 10P/SP, 12P/iSP, 15P/iSP – EIDOS 10, 12, 15 – VEGAS 10, 12, 15, 8CX, 12CX, 15CX
Tiltable wall bracket with 35 mm pole for DVS 8P/SP, 10P/SP, 12P/iSP, 15P/iSP – EIDOS 10, 12, 15 – VEGAS 10, 12, 15, 8CX, 12CX, 15CX
Pole mount with gradual inclination for DVS 8P/SP, 10P/SP, 12P/iSP, 15P/iSP – EIDOS 10, 12, 15 – VEGAS 10, 12, 15, 8CX, 12CX, 15CX
Wall-ceiling horizontal mounting bracket for EIDOS 15
Wall-ceiling vertical mounting bracket for EIDOS 15
|Frequency Response (-10 dB)||53 Hz – 20 kHz|
|Nominal Dispersion||80° x 70° (H x V)|
|Impedance (Nom/Min)||8 Ω / 7.3 Ω|
|Watt AES (Continuous/Peak)||400 W / 1600 W|
|Maximum SPL Output *||132 dB SPL|
|* calculated using +10 dB Crest Factor signal @ 1 m, Free Field|
|Component Low||15″ woofer|
|Component High||1.75″ diaphragm compression driver|
|Loading High||Rotatable moulded horn|
|Connectors||2 x NL4 in parallel Pins 1+/1-|
|Cabinet Material||Baltic birch plywood|
|Cabinet Finish||Black polyurea coating|
|Grill||Epoxy powder coated|
|Installation Points||12 x M8, 4 x M6 threaded points|
|Pole Mount||35 mm socket|
|Height||750 mm – 29 17/32”|
|Width||450 mm – 17 23/32”|
|Depth||390 mm – 15 11/32”|
|Weight||25.8 kg – 56.9 lb|