- Gain/sensitivity user selection capability
- Hardware monitor available for fast local diagnostic
- Fixed frequency switch-mode output stage for high grade sound accuracy
- Very compact size – only 1 Rack Unit for reduced rack cost and space
- Very light weight – only 12 kg (26 pounds) for easier racking and shipping
- Built-in Remote Control (RS 485 interface) for full diagnostic, operational setting and system monitoring
- Smart Card settings, parameters and upgrades functionality
- Lockable set-up by user selectable access key code
- DSP option capability
- Ethernet option capability
T Eleven
Features
- Advanced switch-mode worldwide operating power supply technology for high performance and very compact size
- Power Factor Correction PFC for extremely low mains consumption and extremely wide mains operating range
- Variable speed fan for low noise
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- XLR female / 6.3 mm Jack Neutrik style input connectors with link capability
- Built-in defeatable Clip limiters for each channel
- LCD matrix interactive display
- Digital gain-attenuator control
- User selectable maximum output power for each channel
- User selectable maximum mains current draw
- Comprehensive-user friendly front panel display menu
- Fully protected circuitry design including DC, infrasonic, high frequency, thermal overload and short circuit
- Temperature forecast with LCD traced historical behaviour
- Downloadable log file of functional fault events with time related trace
- Load impedance measurement / display for each channel
- Output power measurements / display for each channel
- Mains voltage and current measurements / display
- Defeatable gate selection for each channel
PERFORMANCE SPECIFICATIONS
Number of channels | 2 |
Output power (per channel) |
Single channel mode: 6000 W @ 2 Ω, 4000 W @ 4 Ω, 2000 W @ 8 Ω Bridge mode: 12000 W @ 4 Ω, 8000 W @ 8 Ω |
Max output voltage | 200 Vpeak |
Max output current | 125 Apeak |
AC Main Power | Power supply: universal, regulated switch mode with PFC (Power Factor Correction) Nominal power requirement: 100-240 V ±10%, 50-60 Hz Operating voltage: 90 V – 264 V |
Power consumption | Idle: 1.3 A @ 115 V, 1.17 A @ 230 V 1/8 of max output power @ 4 Ω: 12.2 A @ 115 V, 6.1 A @ 230 V 1/4 of max output power @ 4 Ω: 22.6 A @ 115 V, 11.3 A @ 230 V |
Gain | Selectable: 26 dB, 29 dB, 32 dB, 35 dB |
Frequency response | 20 Hz – 20 kHz (±0.5 dB) @ 1 W, 8 Ω |
S/N ratio | > 110 dB (20 Hz – 20 kHz, A-weighted) |
Crosstalk separation | > 66 dB @ 1kHz |
Input impedance | 10 kΩ balanced |
Slew rate | 50 V/μs @ 8 Ω, input filter bypassed |
PHYSICAL
Input connector | 2 x Combo Jack/XLR-F – Signal input |
Output connector | 2 x speakON – pins 1+ 2+ / 1- 2- paralleled |
Height | 45 mm – 1 3/4″ |
Width | 483 mm – 19″ |
Depth | 475 mm – 18 3/7″ |
Weight | 12 kg – 26.5 lb |
KAESOP
AES3 and Ethernet optional board for T series amplifiers
KDSP
DSP optional board for T series amplifiers
Top